Re-iterator - Freak Delay // Black

Re-iterator is a delay effect which features options for experimental exploration and performance use. Instead of setting and forgetting it, this concept beckons your curiosity to twiddle and tweak.

*It is capable of traditional delay, chorus, and vibrato effects for your signal. These effects are possible due to the independent volume controls for the WET (delay) signal and the DRY (clean) signal.

*The modulation section provides choice of a triangle or square wave LFO, and a SLOW/FAST switch to extend the range of the RATE (speed) control.

*Instead of a traditional bypass switch, the INPUT MUTE switch removes the input signal from the delay circuit, but allows it to still pass through (as the DRY signal) to the output.

*The ON/OFF switch in the FEEDBACK section allows you to remove feedback entirely and have a clean repeat of the signal.

*The GLIDE feature uses a light-dependent resistor which affects the TIME setting. The more light; the shorter the delay time, the less light; the longer the delay time.

*The GRAB section has a large momentary switch which provides an immediate blast of feedback. There is an AMOUNT control to dial in the intensity of the GRAB effect.

*There is a touch plate on the side which provides an additional path for the delay signal to be fed back into the delay line.

tech specs:
-DC jack is standard 2.1mm, center-negative.
-Operates with a supply of 9VDC.
-Draws no more than 40mA of power.
-Contains reverse-polarity (power) protection.
-Input jack is mono, 1/4"
-Output jack is mono, 1/4"
-No battery connection on inside.
***No battery or power supply is included.